High Beam Headlight Bulbs Guide

High beams are distinguished from low beams by their brighter light, and they are sometimes referred to as “main beam” headlights.

They should be used when driving on dark, rural roads with little oncoming traffic, while low beams should be used in most other driving situations. It's important to switch between high and low beams as necessary to avoid blinding other drivers.

BULB CROSS REFERENCE

Commonly used bulbs

9004

H11

H8H11H16

9003

9012

9005

H4651

9011

H4352

H5001

9005XS

H4351

H4701

As a beginner driver, it's important to understand the proper use of high beam headlights. High beams are a powerful tool that can help you see further down the road, but they can also be dangerous if used improperly.

When to Use High Beams

High beams should be used when driving on dark, rural roads with little to no oncoming traffic. They can help you see further down the road, allowing you to spot potential hazards such as animals, debris, or other obstacles. However, it's important to note that high beams can also be blinding to oncoming drivers. If you see an oncoming vehicle or if you're approaching a vehicle from behind, you should switch to low beams.

When to Use Low Beams

Low beams should be used in most other driving situations. This includes when driving in urban areas, when there is oncoming traffic, or when you're following another vehicle. Low beams provide a more focused beam of light that won't blind other drivers. Additionally, it's important to use low beams in fog or other poor visibility conditions.

How to Switch Between High and Low Beams

Switching between high and low beams is usually done by using a lever or button on the left side of the steering wheel. This lever or button is typically labeled "headlight control" or "beam control." On most vehicles, pushing the lever or button forward will turn on the high beams, while pulling it back will switch to low beams.

As a final note, always keep in mind that good visibility is always more important than using high beams. If visibility is poor, such as in fog or heavy rain, it's always best to use low beams.